Next Well Water Testing Event date is October 5th, 9AM-3PM. Sign up for our e-newsletter to stay up-to-date.
emu_watertesting_infosheet.pdf | |
File Size: | 1115 kb |
File Type: |
5This service is for private drinking water wells only. Public water supplies are tested regularly. Please do not bring samples from public water supplies or non-drinking water sources. Only drinking water well samples will be tested. You do not have to use a special bottle for this screening. Any small clean jar will work—8 ounces of water is enough. Please follow the directions below to sample your well. Collect samples just before getting them to the sample drop-off. Samples must be less than 48 hours old for a valid nitrate result.
Sampling Instructions:
1. Fill out the water Sample Information Sheet.
2. Pick a tap that supplies water that has not run through any treatment devices (water softener, carbon filter, etc.). An outdoor faucet often works well.
3. Run the water for 10-15 minutes before collecting the sample. This will give the pump time to flush the water pressure tank and plumbing so you can collect a valid sample. Disconnect any hoses before collecting the sample; do not sample through a hose. Rinse the sample bottle and lid thoroughly in the water to be sampled; then fill and cap the bottle.
4. Label the bottle clearly with your name, the sampling date, and the well name (cottage well, Mom's well, etc.) using a waterproof pen.
5. You will receive results at the event
Be sure to fill out the Sample Information Sheet (linked above) completely and bring it with your water sample to the drop-off. We need a complete mailing address to get your results back to you. The screening is sponsored by the Washtenaw County Conservation District and the Michigan Agriculture Environmental Assurance Program (MAEAP). It is paid for by funds generated from Michigan pesticide and fertilizer registration and tonnage fees. There is no fee to participate for this service.
The Washtenaw County Conservation District and students from Eastern Michigan University (EMU) will
be testing well water samples on Saturday, October 5th from 9am to 3pm at Room 2304, 705 N. Zeeb Rd.
If you have questions, please contact Paul Buzzard at: 734.302.8715 or [email protected]
Sampling Instructions:
1. Fill out the water Sample Information Sheet.
2. Pick a tap that supplies water that has not run through any treatment devices (water softener, carbon filter, etc.). An outdoor faucet often works well.
3. Run the water for 10-15 minutes before collecting the sample. This will give the pump time to flush the water pressure tank and plumbing so you can collect a valid sample. Disconnect any hoses before collecting the sample; do not sample through a hose. Rinse the sample bottle and lid thoroughly in the water to be sampled; then fill and cap the bottle.
4. Label the bottle clearly with your name, the sampling date, and the well name (cottage well, Mom's well, etc.) using a waterproof pen.
5. You will receive results at the event
Be sure to fill out the Sample Information Sheet (linked above) completely and bring it with your water sample to the drop-off. We need a complete mailing address to get your results back to you. The screening is sponsored by the Washtenaw County Conservation District and the Michigan Agriculture Environmental Assurance Program (MAEAP). It is paid for by funds generated from Michigan pesticide and fertilizer registration and tonnage fees. There is no fee to participate for this service.
The Washtenaw County Conservation District and students from Eastern Michigan University (EMU) will
be testing well water samples on Saturday, October 5th from 9am to 3pm at Room 2304, 705 N. Zeeb Rd.
If you have questions, please contact Paul Buzzard at: 734.302.8715 or [email protected]